Extra Strong flocculent which clears cloudy pools fast.
- Drop and Vac Formula
- Will not affect pH balance
- Ensure your pH is 7.2-7.6
- Shake container well before using ProFloc
- Set the pool filter to re-circulate
- Add 500ml of ProFloc per 30m³ to a bucket of water and distribute around the perimeter of pool.
- Run your pool pump for a minimum of 2 hours and then switch OFF the pump.
- Allow suspended particles within the pool to settle overnight.
- Vacuum to WASTE.
- Backwash filter.
- Repeat if necessary or return pool to Normal Filter Cycle.
- Ensure ph is 7.2-7.6
- Shake container prior to use
- Set the pool filter to recirculate
- Add 500ml of ProFloc per 30m3 to a bucket of water and distribute around the perimeter of the pool
- Run pool pump for a minimum of two hours and then switch off pump
- Allow suspended particles in pool water to settle overnight
- Vacuum to waste
- Backwash Filter
- Repeat if necessary or return pool to normal filter cycle
- Always ensure that your pool is correctly balanced Chlorine 1-2ppm, ph 7.2-7.6, Cyanuric Acid (Stabiliser) 30-80ppm
